Thermal Engineering laboratory is very important for M.Tech students of Mechanical Engineering. The equipments available include various types of Diesel Engines and Petrol Engines, Air Compressor, Air conditioners, Boilers etc.
Students are imparted practical knowledge on different engine conditions with various – systems for enhancement of their knowledge. Students also get practical knowledge about minimization of engine emissions by different techniques with lesser inputs.
| S.NO | NAME OF THE EQUIPMENT |
|---|---|
| 1 | 4-Stroke C I engine set up |
| 2 | Refrigeration Test Rig |
| 3 | Air Conditioning Test Rig |
| 4 | Dryness Fraction Test Rig |
| 5 | Flame Propagation Test Rig |
| 6 | Multi Gas Analyzer |
| 7 | Heat Pipe Demonstration Test Rig |
| 8 | Solar Flat Plate Collector Test Rig |
| 9 | Evacuative Tube concentrator |
This is an important laboratory for Mechanical and Civil Engineering students and is a part of design stream. The modeling of the component and analysis in various fields of Mechanical Engineering are done in this laboratory. Available software packages like AutoCad, Pro-Engineer, CATIA, Ansys – CFD packages are used for design and development of models and subsequently for analysis. This laboratory is also equipped with XL TURN and XL MILL CNC Machines. Students are extensively trained in the use of these packages for engineering applications.
| S.NO | NAME OF THE EQUIPMENT |
|---|---|
| 1 | LENOVO SYSTEMS |
| 2 | ANSYS & CFX SOFTWARE |
| 3 | PRO-E SOFTWARE |
| 4 | MAT LAB |
| S.NO | NAME OF THE LABORATORIES |
|---|---|
| 1 | Production Technology Labarotary |
| 2 | Mechanics Of Solid Laboratory |
| 3 | Instrumentation & Control System Laboratory |
| 4 | Metallurgy & Material Science Laboratory |
| 5 | Heat Transfer Laboratory |
| 6 | Mechanics of Fluid & Hydraulic Machines Laboratory |
| 7 | Thermal Engineering Laboratory |
| 8 | CAD/CAM Laboratory |
| 9 | Machine Tool Laboratory |
| 10 | Engineering Workshop Laboratory |
| 11 | Metrology & Surface Engineering Laboratory |
The prosperity of any society or country is directly dependant upon the production and productivity of every activity of economical development. The main objective of the laboratory is to impart knowledge to students on different manufacturing techniques through study of different processes like welding, casting, sheet metal operations and plastic molding etc. in Production Technology.
| S.NO | NAME OF THE EQUIPMENT |
|---|---|
| 1 | Setup for pattern Design |
| 2 | Setup for mould preparation |
| 3 | Arc welding set-up |
| 4 | Plasma welding set-up |
| 5 | Brazing set-up |
| 6 | Mechanical press |
| 7 | Injection moulding |
| 8 | Blow moulding |
| 9 | Sand properties testing set-up |
| 10 | Metal casting set-up |
| 11 | Spot welding set-up |
| 12 | Tig welding set-up |
| 13 | Blanking and piercing set-up |
| 14 | Gas cutting set-up |
| 15 | Gas welding set-up |
This is an important laboratory that exposes students to the practical aspects of strength of materials. The facilities available include a Universal Testing Machine, Hadrness Testing Machine (Brinnel & Rockwell), Torsion Testing Machine and Machines for Testing Springs. It also includes Impact Testing setups and Testing of Beams in different configurations. It covers all experiments specified by the university and includes some experiments like an Optical flexural slope measurement setup developed in-house.
| S.NO | NAME OF THE EQUIPMENT |
|---|---|
| 1 | Universal Testing Machine |
| 2 | Torsion Testing Machine |
| 3 | Impact Testing Machine |
| 4 | Spring Testing Machine |
| 5 | Brinell hardness testing machine |
| 6 | Rockwell hardness testing machine |
| 7 | Simply supported beam set up |
| 8 | Cantilever beam set up |
| 9 | Beam Slope Measurement Set up |
It is very important laboratory for B.Tech Mechanical Engineering students to understand scientific way of working of various kinds of instruments like Pressure Gauge, Strain Gauge, Displacement, Temperature measurement etc. for different measurements and control systems encountered in engineering. The equipmental setups are design to give knowledge of this including processes of calibration and correction.
| S.NO | NAME OF THE EQUIPMENT |
|---|---|
| 1 | Pressure Gauge |
| 2 | Temperature set up |
| 3 | LVDT Displacement measurement |
| 4 | Angular displacement measurement |
| 5 | Photo and speed pick ups |
| 6 | RotoMetre set up |
| 7 | Vibration seismic pick ups |
| 8 | McleodGuage |
| 9 | Temperature set up |
| 10 | LVDT |
| 11 | Strain guage |
| 12 | Strobo scope |
| 13 | Linear displacement measurement |
This laboratory caters to the need of introducing students to practical aspects of engineering Metallurgy and the available equipment need for this purpose.
It is very important for all Mechanical Engineering students to indentify the various kinds of metals by their micro structures for which good metallurigical microscopes are available. It also involves fine polishing of surface of the metal to identify correct type of metal and micro structure. Students get knowledge on ways of identifying metals and their applications for different engineering works.
| S.NO | NAME OF THE EQUIPMENT |
|---|---|
| 1 | Grinders |
| 2 | Chemicals |
| 3 | Luttens |
| 4 | Samples |
| 5 | Furnace |
| 6 | Cold setting compound die set |
| 7 | Specimen hot mounting press |
| 8 | Hand polishing stands |
| 9 | Single disk, double disk polisher Grinders |
| 10 | Microscopes |
| 11 | Rockwell hardness tester |
| 12 | Jominy end quench apparatus |
| 13 | Abrasive cut-off machine |
| 14 | Metallurgical micro scope with CCD software camera. |
This is an important laboratory for the Thermal Engineering stream which exposes the students to various aspects of Heat Transfer related to Conduction, Convention and Radiation. Setups covering all these phenomena are available in full conformity with the specifications of the University. The equipment available includes Conduction and measurements setups (Metals & Insulators). Convention study setups (Natural & Forced). Radiation setups for Emissivity measurements, boiling and condensation studies etc. A setup developed in-house for study of Heat Exchangers is also available.
| S.NO | NAME OF THE EQUIPMENT |
|---|---|
| 1 | Heat Conduction through a composite wall |
| 2 | Heat flow through a lagged pipe |
| 3 | Thermal Conductivity of insulating powder |
| 4 | Thermal conductivity of Metal rod |
| 5 | Heat Transfer from a pin fin |
| 6 | Steafan Boltzmann Apparatus |
| 7 | Heat Transfer in natural convection |
| 8 | Heat Transfer in forced convection |
| 9 | Parallel flow/counter flow Heat exchanger |
| 10 | Emissivity measurement Apparatus |
| 11 | Certified Heat flux apparatus |
| 12 | Drop and film form condensation |
| 13 | Heat pipe demonstration |
| 14 | Two phase heat transfer |
This is very important for Mechanical , Civil and Electrical Engineering students. This gives wide knowledge about practical aspects of Fluid Mechanics related systems working of Hydraulic principle. This laboratory also includes Hydraulic Machines like Turbines and Pumps, for hydraulic power production and utilization. Students will get through knowledge on production of hydro electricity from various kinds of turbines.
| S.NO | NAME OF THE EQUIPMENT |
|---|---|
| 1 | Pelton wheel turbine |
| 2 | Francis turbine |
| 3 | Kalpan turbine |
| 4 | Centrifugal pump Test Rig |
| 5 | Multi Stage Centrifugal Pump |
| 6 | Reciprocating pump Test Rig |
| 7 | Venturi meter |
| 8 | Orifice meter set-up |
| 9 | Pipe Line Assembly for Determination of head losses and friction |
| 10 | Bernoullix Apparatus |
| 11 | Impactof Jet on Vanes |
| 12 | Notch calibration set-up |
Thermal Engineering laboratory is very important for B.Tech students of Mechanical Engineering. The equipments available includes various types of Diesel Engines and Petrol Engines, Air Compressor, Air conditioners, Boilers etc.
Students are imparted practical knowledge on different engine conditions with various – systems for enhancement of their knowledge. Students also get practical knowledge about minimization of engine emissions by different techniques with lesser inputs.
| S.NO | NAME OF THE EQUIPMENT |
|---|---|
| 1 | Multicylinder S I EngineSet up for Morse Test |
| 2 | 4- Stroke S I Engine set up |
| 3 | 2- Stroke S I Engine set up |
| 4 | Variable compression Ratio Engine Set Up |
| 5 | 4-Stroke C I engine set up |
| 6 | Twin cylinder 4-Stroke diesel engine |
| 7 | Boiler Models |
| 8 | Cut section model |
| 9 | Assembling & Disassembling |
| 10 | Two stage Air compressor Test Rig |
This is an important laboratory for Mechanical and Civil Engineering students and is a part of design stream. The modeling of the component and analysis in various fields of Mechanical Engineering are done in this laboratory. Available software packages like AutoCad, Pro-Engineer, CATIA, Ansys – CFD packages are used for design and development of models and subsequently for analysis. This laboratory is also equipped with XL TURN and XL MILL CNC Machines. Students are extensively trained in the use of these packages for engineering applications.
| S.NO | NAME OF THE EQUIPMENT |
|---|---|
| 1 | X L TURN CNC Machine |
| 2 | X L MILL CNC Machine |
| 3 | LENOVO SYSTEMS |
The main objective of this laboratory is to provide basic knowledge on different machines like Lathe, Shaper, Planer, Milling and Grinding and to perform some basic operations on these machine tools. Machine tool laboratory familiarizes students with prosesses of production of all manufactured goods using appropriate machine tools.
| S.NO | NAME OF THE EQUIPMENT |
|---|---|
| 1 | Lathe Machine - Gear Driven |
| 2 | Radial Drilling Machine |
| 3 | Shaping Machine |
| 4 | Horizontal Milling Machine |
| 5 | Surface Grinding Machine |
| 6 | Lathe Machine - Belt Driven |
| 7 | 3 Jaw Chuck |
| 8 | Four Jaw Chuck |
| 9 | Follow Rest for Lathe |
| 10 | Face Plate |
| 11 | Study Rest |
| 12 | Slotting Machine |
| 13 | Tool & Cutter Machine |
| 14 | Planer machine |
This laboratory is caters to learning on a crucially important area for Mechanical Engineering students related to manufacturing of different parts with high accuracy. Students get through knowledge on use of high accuracy measuring tools like Sine bar, Slip gauges, Vernier Callipers, Micrometer, Dial indicator, Surface measuring devices like Sprit level bottle, etc. Students get practical knowledge about different kinds of accuracy tests such as leveling of machines and jobs.
| S.NO | NAME OF THE EQUIPMENT |
|---|---|
| 1 | Vernier calipers with fine adjustment(0-200mm) |
| 2 | Vernier calipers dial type(0-150) |
| 3 | Outside micrometer(0-25) |
| 4 | Outside micrometer(25-50) |
| 5 | Inside micrometer(5-30) |
| 6 | Bore gauge(18-35mm) |
| 7 | Bore gauge(35-60) |
| 8 | Gear tooth vernier calipers |
| 9 | Bevel protractor |
| 10 | Sine bar |
| 11 | Slip gauge set |
| 12 | Surface roughness tester portable |
| 13 | Spirit level set up |
| 14 | Granite surface plate |
| 15 | MS stand with leveling screws for surface plate |
| 16 | B.Block(steel) with clamp Hardened (Indian made) |
| 17 | Angle plate (CI) |
| 18 | Tool makers microscope with stand accessories |
Knowledge of different Engineering workshop practices are essential for all branches of Engineering. Trades like Fitting, Carpentry, Foundry, Black Smithy, Tin Smithy, Plumbing, House wiring fares taught to all engineering students in their workshop sesseions. The knowledge gained here goes a long way to educate the students in engineering applications of workshop technology as its use in day to day life.
This also enables the students to learn about different types of tools used for different works and also correct way of carrying out various operations.
| S.NO | NAME OF THE EQUIPMENT |
|---|---|
| 1 | Blower with motor(2.5HP) |
| 2 | Blower with motor(1Hp) |
| 3 | Wood lathe |
| 5 | Leg vice |
| 6 | Furnace |
